Get up-front protection with our Bay Mount IDE RAID drive mirroring controller. Featuring our easy to use DupliDisk3 (DD3) IDE disk mirror technology, the Bay Mount fits perfectly into any standard 5.25" external drive bay. It's the ideal RAID solution for mirroring two IDE drives where no free PCI slots are available. (See our 3.5 " Bay Mount if you have no free 5.25 " bays. )
If your computer is outfitted with SATA drives, please select one of our (DD4) SATA mirroring controllers from the navigation bar on the left.
Easy to Install and Use
You just slide the Bay Mount in place, connect your IDE (Parallel ATA) drives using the provided cables, and run our quick and easy mirroring utility. There's no need for hardware drivers, no interrupt or software conflicts!
When you're done, you'll have real time RAID backup! Every time you save data to your drive, the Bay Mount will automatically send the information to both drives, so you always have an exact (and bootable, where applicable) duplicate of your drive and all the information it contains. If one of the drives fails, an alarm will sound to let you know a drive needs to be replaced but the Bay Mount's automatic failover control will have the other drive will take over immediately. And you and your business will stay up and running!
Part No. DD3-B5B (Beige) DD3-B5K (Black)
Features & Benefits
- Patented IDE (Parallel ATA) RAID mirroring technology
- Supports IDE, EIDE (Parallel ATA) drives up to 144 petabytes
- Operating system and hardware independent
- 100% data redundancy and
- Automatic failover.
- Automatic background rebuild
- Audible and visual alarms
- Front panel LED status lights
- Requires no bus slot; mounts in 5.25” drive bay
- Requires no drivers, IRQs or TSRs
- Easy to use DupliDisk Management utilities
- Remote administration/notification available
- UDMA 100/66/33, IDE, EIDE support
- Support for mixed (dissimilar) drives
| Drive Interface |
IDE/E-IDE/UDMA |
| Data Path |
IDE/E-IDE/UDMA
Defined by host controller |
| Hard Disk Interface |
Cable 18 inches maximum
80 Conductor - 40 pin connector |
| Host Interface |
Cable 18 inches maximum
80 Conductor - 40 pin connector |
| Electrical Input |
Voltage 5V DC (+/- 5%)
Current 450ma operating, 600ma peak |
| Physical Dimensions |
Length: 6.50"
Width: 5.75” |
| Operating |
Temperature: 0 to 50 degrees C
Humidity: 8 to 87% non-condensing |
| MTBF |
MIL-HDBK-217 = 580,383 hours
Bellcore rating = 2,695,418 hours |
| EMC/EMI Compliance |
FCC class B certification
CE certification |
DPS Warranty
1 Year Warranty
30-day satisfaction guarantee
Part #: DD3-B5K Shipping Weight: 5.0000
Length: 1.6200 Width: 5.7500 Depth: 6.5000
